kftw Posted October 26, 2006 #1 Share Posted October 26, 2006 I know at some point we will have to get on I-45 to cross the bridge into Galveston. In the past when going to Houston we have always taken the back roads to avoid I-45 going to the Richmond area. We will be coming from just South of Fort Worth. Anyone in the area have any suggestions? Where is a good spot to get onto I-45? Thanks for your help. Link to comment Share on other sites More sharing options...
clearlakecruisers Posted October 26, 2006 #2 Share Posted October 26, 2006 Not sure exactly why you would want to avoid I-45 through Houston and south into Galveston. If you are coming from south of Fort Worth wouldn't it just be easier to go east to I-45 south of Dallas (Corsicana?) and stay on I-45 until you get to the cruise port turn-off at Harborside in Galveston? That's a straight shot and the most direct way to go. Coming into Houston from the north, you could take either Beltway 8 (tollroad) or 610 Loop in the northern section of Houston and hook up with I-45 again in the southern suburbs. That would let you avoid the downtown area but, honestly, I think it would be more trouble and extra miles/time than it was worth. I'm out on the roads here a lot as a real estate appraiser and, unfortunately, if you must travel around/through Houston during rush hours, traffic is just something you have to endure. If the state legislators from the Houston area ever can get the control of the highway funds that the Dallas contingent has had, perhaps we'll have a roadway system like our neighbor's to the north enjoy. LOL Link to comment Share on other sites More sharing options...
DannyMac Posted October 27, 2006 #3 Share Posted October 27, 2006 There is nly two times during the day you would want to avoid I-45, early AM whie folks are trying to get to work and afternoon when everyone is trying to get home. On weekends, any time is good!. There is one area that might cause a delay, it is I-45S and Dixie farm road overpass. There are six lanes, I-45, Beltway 8, and feeder road on ramps that funnel together into 3 lanes just before the overpass. Whoever designed this was not too smart!! Link to comment Share on other sites More sharing options...
txskier Posted October 28, 2006 #4 Share Posted October 28, 2006 There is one area that might cause a delay, it is I-45S and Dixie farm road overpass. There are six lanes, I-45, Beltway 8, and feeder road on ramps that funnel together into 3 lanes just before the overpass. Whoever designed this was not too smart!! .....yeah......the ole "Dixie Chicken slowdown"......seems to be worse for the weekenders coming down to Galveston sometimes:confused: Link to comment Share on other sites More sharing options...
TrisZ Posted November 1, 2006 #5 Share Posted November 1, 2006 Well .... the earlier comment about only having problems during rush hour traffic is right ..... only problem is ... we have SEVEN hours of rush hour every day! :eek: I'm on I-45 every day and it really depends on when you're going to be on it. Are you driving in on a Saturday morning for a departure? If so, just take 45 all the way and, unless there's a wreck, you probably won't have any issues at all. If you're coming on a weekday, it would depend on the time of day that you'll be coming through town as to which way I'd recommend you go. On any weekday I would probably *not* take I-45 all the way through -- even if I had to drive farther. Here in Houston we don't tell people "how far" something is ... we tell them "how long" it'll take to get there! :rolleyes: I often will drive 5-10+ miles to save 20-45 minutes! Lemme know and I'll tell you what *I* would do! Tris Z Link to comment Share on other sites More sharing options...
kftw Posted November 7, 2006 Author #6 Share Posted November 7, 2006 Well .... the earlier comment about only having problems during rush hour traffic is right ..... only problem is ... we have SEVEN hours of rush hour every day! :eek: I'm on I-45 every day and it really depends on when you're going to be on it. Are you driving in on a Saturday morning for a departure? If so, just take 45 all the way and, unless there's a wreck, you probably won't have any issues at all. If you're coming on a weekday, it would depend on the time of day that you'll be coming through town as to which way I'd recommend you go. On any weekday I would probably *not* take I-45 all the way through -- even if I had to drive farther. Here in Houston we don't tell people "how far" something is ... we tell them "how long" it'll take to get there! :rolleyes: I often will drive 5-10+ miles to save 20-45 minutes! Lemme know and I'll tell you what *I* would do! Tris Z Thanks Tris Z. We'll be coming in on a Friday probably early afternoon between 1 & 2 if not earlier. Don't mind the extra miles. Link to comment Share on other sites More sharing options...
Jhawktx Posted November 8, 2006 #7 Share Posted November 8, 2006 Thanks Tris Z. We'll be coming in on a Friday probably early afternoon between 1 & 2 if not earlier. Don't mind the extra miles. Then just take I-45 the whole way. Not sure what the big deal is...especially at that time of day. Link to comment Share on other sites More sharing options...
noobiecruiser Posted November 9, 2006 #8 Share Posted November 9, 2006 You won't have a problem that time of day - like others have said, just avoid rush hour. You might want to take the loop around the city though instead of going straight through on 45 (take 610 or Beltway 8). Link to comment Share on other sites More sharing options...
kftw Posted November 10, 2006 Author #9 Share Posted November 10, 2006 Thanks for all the answers. Was trying to appease DH as he doesn't even like driving in Dallas & we live in the area. Link to comment Share on other sites More sharing options...
brn2crz Posted November 10, 2006 #10 Share Posted November 10, 2006 You may be thinking of taking 6....Some people head 35,and hook up to hwy 6...You know,through Waco, then down through College Station to Hempstead....then around 610 to 45... I used to live in FW (Burleson,and Hillsboro Stephenville as well) I took this way hope quite often...much easier than doing 287 over to 45 at times... And if construction is still bad around Corsicana...I would do it!!! Link to comment Share on other sites More sharing options...
kftw Posted November 12, 2006 Author #11 Share Posted November 12, 2006 You may be thinking of taking 6....Some people head 35,and hook up to hwy 6...You know,through Waco, then down through College Station to Hempstead....then around 610 to 45...I used to live in FW (Burleson,and Hillsboro Stephenville as well) I took this way hope quite often...much easier than doing 287 over to 45 at times... And if construction is still bad around Corsicana...I would do it!!! Thank you. That's just information I was hoping for. We are going to give it a try. Thanks again. Link to comment Share on other sites More sharing options...
shygnome Posted November 28, 2006 #12 Share Posted November 28, 2006 On a Friday afternoon, I'd take: I45 south to The Woodlands Hardy Tollroad south to 610 610 loop east/south and reconnect with I45 on south end of the city. I45 south to Galveston. I admit up front that this is probably not much quicker, but 30 miles of Hardy and avoiding downtown Houston is stress free. Link to comment Share on other sites More sharing options...
GCurry Posted November 28, 2006 #13 Share Posted November 28, 2006 On a Friday afternoon, I'd take:I45 south to The Woodlands Hardy Tollroad south to 610 610 loop east/south and reconnect with I45 on south end of the city. I45 south to Galveston. I admit up front that this is probably not much quicker, but 30 miles of Hardy and avoiding downtown Houston is stress free. I'm with Shygnome on this one, you catch the Hardy Toll Rd. just past the Woodlands after the Rayford Sawdust exit. There will be two toll stations @ $1.25 each but a relaxed easy drive for that 30 miles. The forever construction before Corsicana has been cleared, you will still get congestion from Conroe down to the Woodlands, and slow at Dixie FM. Do not take Beltway 8 East it isn't finished. You can take 35 down to Waco and cut down to 290 and the Sam Houston Toll Rd. West around the City, but you sure add a lot of miles. Link to comment Share on other sites More sharing options...
ROPD184 Posted November 28, 2006 #14 Share Posted November 28, 2006 Well luckily all the construction on 377 there in Midlothian is cleared up. They constructed a loop around the town so no stopping. Still a little in Corsicana..but thats JUST comin back....so no biggie...but we DID run into houston during "Non peak" traffic times....and found a Major accidentthat had the whole interstate CLOSED....i was MAD!! LOL ive never done it, but heard it was easy, as the previous poster said, to take 35 to waco...6 to hempstead, and then 290 on over to 610, AROUND to the south side of the city , then catch 45. Hope thatworks for ya! WE may try itsome day just for fun! Link to comment Share on other sites More sharing options...
isujim Posted November 28, 2006 #15 Share Posted November 28, 2006 This thread has been very helpful.......I think we are driving down to Galveston from OKC to catch the Voyager.......normally we fly if we can. So what time does the Houston "rush hour(s)" start in the afternoon time period?? Link to comment Share on other sites More sharing options...
kftw Posted November 28, 2006 Author #16 Share Posted November 28, 2006 Thanks everyone. Link to comment Share on other sites More sharing options...
GCurry Posted November 28, 2006 #17 Share Posted November 28, 2006 Since Burleson is on 35, I'd take it to 6 to 290. But, I would take the Sam Houston Tollway West around the City, as 610 has some of the worst traffic in Houston around the Gallaria area. The Sam Houston will have 4 toll stops @ $1.25 each, but it's easy driving. The traffic starts building about 3:30 until after 6. Link to comment Share on other sites More sharing options...
isujim Posted November 28, 2006 #18 Share Posted November 28, 2006 I appreciate the info............hopefully.........AA or SW will open up one heck of an air deal by the time the cruise rolls around and we'll end up flying......:) Link to comment Share on other sites More sharing options...
shygnome Posted November 28, 2006 #19 Share Posted November 28, 2006 Since Burleson is on 35, I'd take it to 6 to 290. But, I would take the Sam Houston Tollway West around the City, as 610 has some of the worst traffic in Houston around the Gallaria area.The Sam Houston will have 4 toll stops @ $1.25 each, but it's easy driving. The traffic starts building about 3:30 until after 6. Agree!! If coming from the west or Northwest (290) this is the way to go. Be clear, if from the north (I45/Hardy), TAKE 610 EAST. 610 west from there is a nightmare (not to mention the wrong way since I45 really moves to a southeasterly direction south of downtown). Check it out on the map at this link: http://maps.yahoo.com/;_ylc=X3oDMTExNmIycG51BF9TAzI3MTYxNDkEc2VjA2ZwLWJ1dHRvbgRzbGsDbGluaw--#mvt=m&trf=0&lon=-95.296783&lat=29.825157&mag=9 Also, you will want to clear the south side of Houston on 610 no later than 3:30pm. Northside shouldn't be a factor on the Hardy. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.