Gizzy02 Posted March 20, 2013 #1 Share Posted March 20, 2013 What is that website that shows what is over each other on the decks. I have been on it before but can't recall what it is. You can pull up a deck, on a certain ship and then slide the upper deck over it so you can actually see what would be over you. Thanks so much to anyone that can help me!! Link to comment Share on other sites More sharing options...
pspercy Posted March 20, 2013 #2 Share Posted March 20, 2013 Here you go:) It's not 100% accurate in some cases but it's generally good enough. http://www.cruisedeckplans.com/DP/Main/index.php Link to comment Share on other sites More sharing options...
Big_G Posted March 20, 2013 #3 Share Posted March 20, 2013 What is that website that shows what is over each other on the decks. I have been on it before but can't recall what it is. You can pull up a deck, on a certain ship and then slide the upper deck over it so you can actually see what would be over you. Thanks so much to anyone that can help me!! OP, I can tell you from experience that the Freedom Class on that site is inaccurate especially if you're concerned about the cantilevered hot tubs. Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
kyriecat Posted March 20, 2013 #4 Share Posted March 20, 2013 I know for a fact that the Freedom class is wrong. When I used it for comparison, it showed my cabin as being under the hot tubs, but in reality (WHEW!!) we were a couple cabins away. If I remember correctly, there are a mismatch on the Vision class deck plans too. I think it's decks 8 & 9 that don't align right but not positive on that. Moral of the story is always look at how the elevators overlay. RC isn't consistant with the scale used for the deck plans. If the elevators aren't lined up, then the decks used different scales. Link to comment Share on other sites More sharing options...
packercruising Posted March 20, 2013 #5 Share Posted March 20, 2013 If you have a mobile device, download Ship Mate. Link to comment Share on other sites More sharing options...
CENTEX CRUISER Posted March 20, 2013 #6 Share Posted March 20, 2013 When you use the site mentioned above, line up the elevators to make it accurate, otherwise, side by side, it will be off. Link to comment Share on other sites More sharing options...
Big_G Posted March 20, 2013 #7 Share Posted March 20, 2013 When you use the site mentioned above, line up the elevators to make it accurate, otherwise, side by side, it will be off. That was the problem. The elevators wouldn't line up at the both ends of the ship at the same time. Link to comment Share on other sites More sharing options...
Big_G Posted March 20, 2013 #8 Share Posted March 20, 2013 If you have a mobile device, download Ship Mate. Thanks. I've had Ship Mate all along and never tried that. It's a lot closer than the other site. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.