Edhoff Posted August 15, 2018 #1 Share Posted August 15, 2018 Notice I said easy, my backseat driver not very good at map reading(no GPS). Driving south on 83 from York. Option #1, 83 to 695 beltway:(:(:(to 95 to port. Option #2 83 into city, to Fayette to Light to Key Highway to terminal. Other EASY options highly appreciated, don't need any stress prior to our cruise. Thanks in advance Link to comment Share on other sites More sharing options...
montekat Posted August 16, 2018 #2 Share Posted August 16, 2018 This is from one of the cruiseline's website: Traveling from the north: Follow I-95 South through the Ft. McHenry Tunnel, be sure to be in the right lane when going through the tunnel. Take Exit 55, Key Highway. Turn left at the traffic light onto East McComas Street. Follow the signs to the South Locust Point Cruise Terminal's entrance on the right. If you go on googlemaps, you can print out the directions with turn by turn steps. GPS units are so cheap now, I don't know how I drove long distances without one, even when I know where I am going. Nice to know what time I will arrive. Good luck! Link to comment Share on other sites More sharing options...
rubytue Posted August 16, 2018 #3 Share Posted August 16, 2018 Easiest is probably the beltway to 95. The problem with going through the city, and you show, is that 83 ends and you have to navigate around the harbor on surface streets. Stoplights and every block, one way streets, etc. Its not that its hard, it'll just likely be more stressful. For example, if you end up two lanes over from your turn at the next block. Do you have a cell phone with data? You can use google maps navigation or download Waze. No need for a stand-alone GPS. Link to comment Share on other sites More sharing options...
Rare mskaufman Posted August 16, 2018 #4 Share Posted August 16, 2018 As a local I would use option 2, except during rush hour. I would not try to give someone directions using option 2. My recommendation (with a toll) is what rubytue says, which is to take the Beltway to I-95 and get off right at the cruise terminal. Link to comment Share on other sites More sharing options...
pacruise804 Posted August 16, 2018 #5 Share Posted August 16, 2018 Notice I said easy, my backseat driver not very good at map reading(no GPS). Driving south on 83 from York. Option #1, 83 to 695 beltway:(:(:(to 95 to port.Option #2 83 into city, to Fayette to Light to Key Highway to terminal. Other EASY options highly appreciated, don't need any stress prior to our cruise. Thanks in advance We will be cruising in September coming the same route. We will likely take option 1. Having an EZ pass will remove one more potential stress point. Baltimore isn't too bad, Manhattan and Brooklyn on the other hand :o Have a great cruise! Link to comment Share on other sites More sharing options...
Edhoff Posted August 16, 2018 Author #6 Share Posted August 16, 2018 As a local I would use option 2, except during rush hour. I would not try to give someone directions using option 2. My recommendation (with a toll) is what rubytue says, which is to take the Beltway to I-95 and get off right at the cruise terminal. Thanks for the advice, when i get to the 695 junction, will that be 695 East?? Link to comment Share on other sites More sharing options...
Rare mskaufman Posted August 17, 2018 #7 Share Posted August 17, 2018 Yes, 695 East. Link to comment Share on other sites More sharing options...
Tony O Posted August 17, 2018 #8 Share Posted August 17, 2018 Use to visit Allentown every year in August for the weekend. Anyway there are 2 options to get to I95 If you need north around the top end if the beltway to 95 there will be a toll to pay at the Fort McHenry Tunnel (FYI if you use that way stay in far right lane as exit is about 100 yards after you exit tunnel and no way to get over if you are I wrong lane) If you go around the lower end of the beltway to 95 there is no toll. Link to comment Share on other sites More sharing options...
jcl410 Posted August 20, 2018 #9 Share Posted August 20, 2018 I'd definitely take I-695 to I-95 versus trying to navigate through the city. According to Google maps, it's 60 miles to go 695E to I-95S through the tunnel (with toll), and 63 miles going west then north. I'd listen to 1090AM on the radio for traffic information if one or the other route has accidents. (Assuming you're driving down the same day, rush hour will be over by 10:00am.) Aloha, John Link to comment Share on other sites More sharing options...
Edhoff Posted August 20, 2018 Author #10 Share Posted August 20, 2018 Thank You very much for the info. Will hit I-95 around 10:30/11:00 on Saturday 8/25. The tip about listening to 1090am should eliminate any major traffic problems. Been on the beltway a few times. Link to comment Share on other sites More sharing options...
Edhoff Posted August 30, 2018 Author #11 Share Posted August 30, 2018 just back from cruise, thanks to all for directions. Took 83 to 695 outside loop to 95 to exit 55, was a breeze on a Saturday morning. a little slower on Thur until I hit 83 Link to comment Share on other sites More sharing options...
SRF Posted August 31, 2018 #12 Share Posted August 31, 2018 Option 1 BY FAR. Even rush hour. Rush hour on surface streets, where you can be stuck in the wrong lane and not be able to turn or have to turn, and you can be really lost. Also, both ships out of Baltimore port, you don't need to be there really early, so no rush hour. Grandeur boards around 11AM. I think Pride is later. 83 to 695 to 95 S. Be in the right hand tube when you are at the tunnel. Follow the signs. EASY. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now